You are viewing docs on Elastic's new documentation system, currently in technical preview. For all other Elastic docs, visit elastic.co/guide.

Azure Application Gateway

Collect Azure Application Gateway logs with Elastic Agent.

Version
1.11.4 (View all)
Compatible Kibana version(s)
8.12.0 or higher
Supported Serverless project types

Security
Observability
Subscription level
Basic

Azure Application Gateway Logs capture essential information like access to your gateways (caller's IP, response latency, and more) or security events to detect or prevent threats.

Supported log categories:

Log CategoryDescription
This log can be used to view Application Gateway access patterns and analyze important information. This includes the caller's IP, requested URL, response latency, return code, and bytes in and out. An access log is collected every 60 seconds. This log contains one record per instance of Application Gateway. The Application Gateway instance is identified by the instanceId property.
This log can be used to view the requests that are logged through either detection or prevention mode of an application gateway that is configured with the web application firewall. Firewall logs are collected every 60 seconds.

Requirements and setup

Refer to the Azure Logs page for more information about setting up and using this integration.

Settings

eventhub : string An Event Hub is a fully managed, real-time data ingestion service. Elastic recommends using only letters, numbers, and the hyphen (-) character for Event Hub names to maximize compatibility. You can use existing Event Hubs having underscores (_) in the Event Hub name; in this case, the integration will replace underscores with hyphens (-) when it uses the Event Hub name to create dependent Azure resources behind the scenes (e.g., the storage account container to store Event Hub consumer offsets). Elastic also recommends using a separate event hub for each log type as the field mappings of each log type differ. Default value insights-operational-logs.

consumer_group : string The publish/subscribe mechanism of Event Hubs is enabled through consumer groups. A consumer group is a view (state, position, or offset) of an entire event hub. Consumer groups enable multiple consuming applications to each have a separate view of the event stream, and to read the stream independently at their own pace and with their own offsets. Default value: $Default

connection_string : string The connection string is required to communicate with Event Hubs, see steps here.

A Blob Storage account is required in order to store/retrieve/update the offset or state of the eventhub messages. This means that after stopping the Azure logs package it can start back up at the spot that it stopped processing messages.

storage_account : string The name of the storage account where the state/offsets will be stored and updated.

storage_account_key : string The storage account key, this key will be used to authorize access to data in your storage account.

storage_account_container : string The storage account container where the integration stores the checkpoint data for the consumer group. It is an advanced option to use with extreme care. You MUST use a dedicated storage account container for each Azure log type (activity, sign-in, audit logs, and others). DO NOT REUSE the same container name for more than one Azure log type. See Container Names for details on naming rules from Microsoft. The integration generates a default container name if not specified.

resource_manager_endpoint : string Optional, by default we are using the azure public environment, to override, users can provide a specific resource manager endpoint in order to use a different azure environment.

Resource manager endpoints:

# Azure ChinaCloud
https://management.chinacloudapi.cn/

# Azure GermanCloud
https://management.microsoftazure.de/

# Azure PublicCloud 
https://management.azure.com/

# Azure USGovernmentCloud
https://management.usgovcloudapi.net/

Logs

application_gateway

The application_gateway data stream of the Azure Logs package will collect any Application Gateway log events that have been streamed through an Azure event hub.

An example event for application_gateway looks as following:

{
    "@timestamp": "2017-04-26T19:27:38.000Z",
    "azure": {
        "resource": {
            "group": "PEERINGTEST",
            "id": "/SUBSCRIPTIONS/23103928-B2CF-472A-8CDB-0146E2849129/RESOURCEGROUPS/PEERINGTEST/PROVIDERS/MICROSOFT.NETWORK/APPLICATIONGATEWAYS/Application-Gateway-Name",
            "name": "Application-Gateway-Name",
            "provider": "MICROSOFT.NETWORK/APPLICATIONGATEWAYS"
        },
        "subscription_id": "23103928-B2CF-472A-8CDB-0146E2849129",
        "application_gateway": {
            "instance_id": "ApplicationGatewayRole_IN_0",
            "operation_name": "ApplicationGatewayAccess"
        }
    },
    "cloud": {
        "account": {
            "id": "23103928-B2CF-472A-8CDB-0146E2849129"
        },
        "provider": "azure"
    },
    "destination": {
        "address": "www.contoso.com",
        "bytes": 553,
        "domain": "www.contoso.com"
    },
    "ecs": {
        "version": "8.5.0"
    },
    "event": {
        "category": [
            "network"
        ],
        "kind": "event",
        "original": "{\"resourceId\":\"/SUBSCRIPTIONS/23103928-B2CF-472A-8CDB-0146E2849129/RESOURCEGROUPS/PEERINGTEST/PROVIDERS/MICROSOFT.NETWORK/APPLICATIONGATEWAYS/Application-Gateway-Name\",\"operationName\":\"ApplicationGatewayAccess\",\"timestamp\":\"2017-04-26T19:27:38Z\",\"category\":\"ApplicationGatewayAccessLog\",\"properties\":{\"instanceId\":\"ApplicationGatewayRole_IN_0\",\"clientIP\":\"67.43.156.7\",\"clientPort\":46886,\"httpMethod\":\"GET\",\"requestUri\":\"/phpmyadmin/scripts/setup.php\",\"requestQuery\":\"X-AzureApplicationGateway-CACHE-HIT=0\u0026SERVER-ROUTED=10.4.0.4\u0026X-AzureApplicationGateway-LOG-ID=874f1f0f-6807-41c9-b7bc-f3cfa74aa0b1\u0026SERVER-STATUS=404\",\"userAgent\":\"-\",\"httpStatus\":404,\"httpVersion\":\"HTTP/1.0\",\"receivedBytes\":65,\"sentBytes\":553,\"timeTaken\":205,\"sslEnabled\":\"off\",\"host\":\"www.contoso.com\",\"originalHost\":\"www.contoso.com\"}}",
        "type": [
            "connection"
        ]
    },
    "http": {
        "request": {
            "method": "GET"
        },
        "response": {
            "status_code": 404
        },
        "version": "1.0"
    },
    "network": {
        "bytes": 618,
        "protocol": "http"
    },
    "observer": {
        "name": "Application-Gateway-Name",
        "product": "Web Application Firewall",
        "type": "firewall",
        "vendor": "Azure"
    },
    "related": {
        "hosts": [
            "www.contoso.com"
        ],
        "ip": [
            "67.43.156.7"
        ]
    },
    "source": {
        "address": "67.43.156.7",
        "as": {
            "number": 35908
        },
        "bytes": 65,
        "geo": {
            "continent_name": "Asia",
            "country_iso_code": "BT",
            "country_name": "Bhutan",
            "location": {
                "lat": 27.5,
                "lon": 90.5
            }
        },
        "ip": "67.43.156.7",
        "port": 46886
    },
    "tags": [
        "preserve_original_event"
    ],
    "url": {
        "domain": "www.contoso.com",
        "path": "/phpmyadmin/scripts/setup.php",
        "query": "X-AzureApplicationGateway-CACHE-HIT=0\u0026SERVER-ROUTED=10.4.0.4\u0026X-AzureApplicationGateway-LOG-ID=874f1f0f-6807-41c9-b7bc-f3cfa74aa0b1\u0026SERVER-STATUS=404"
    }
}

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
azure.application_gateway.action
Action taken on the request. Available values are: Blocked and Allowed (for custom rules) Matched (when a rule matches a part of the request) Detected and Blocked (these are both for mandatory rules, depending on if the WAF is in detection or prevention mode).
keyword
azure.application_gateway.hostname
Hostname or IP address of the Application Gateway.
keyword
azure.application_gateway.instance_id
Application Gateway instance for which firewall data is being generated. For a multiple-instance application gateway, there is one row per instance.
keyword
azure.application_gateway.operation_name
Operation name
keyword
azure.application_gateway.policy.id
Unique ID of the Firewall Policy associated with the Application Gateway, Listener, or Path.
keyword
azure.application_gateway.policy.scope
The location of the policy - values can be "Global", "Listener", or "Location".
keyword
azure.application_gateway.policy.scope_name
The name of the object where the policy is applied.
keyword
azure.application_gateway.transaction_id
Unique ID for a given transaction which helps group multiple rule violations that occurred within the same request.
keyword
azure.correlation_id
Correlation ID
keyword
azure.resource.authorization_rule
Authorization rule
keyword
azure.resource.group
Resource group
keyword
azure.resource.id
Resource ID
keyword
azure.resource.name
Name
keyword
azure.resource.namespace
Resource type/namespace
keyword
azure.resource.provider
Resource type/namespace
keyword
azure.subscription_id
Azure subscription ID
keyword
azure.tenant_id
tenant ID
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.address
Some event destination addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is.
keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.domain
The domain name of the destination system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.
keyword
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.action
The action captured by the event. This describes the information in the event. It is more specific than event.category. Examples are group-add, process-started, file-created. The value is normally defined by the implementer.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Event dataset
constant_keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data coming in at a regular interval or not.
keyword
event.module
Event module
constant_keyword
event.original
Raw text message of entire event. Used to demonstrate log integrity or where the full log message (before splitting it up in multiple parts) may be required, e.g. for reindex. This field is not indexed and doc_values are disabled. It cannot be searched, but it can be retrieved from _source. If users wish to override this and index this field, please see Field data types in the Elasticsearch Reference.
keyword
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
http.request.method
HTTP request method. The value should retain its casing from the original event. For example, GET, get, and GeT are all considered valid values for this field.
keyword
http.response.status_code
HTTP response status code.
long
http.version
HTTP version.
keyword
message
For log events the message field contains the log message, optimized for viewing in a log viewer. For structured logs without an original message field, other fields can be concatenated to form a human-readable summary of the event. If multiple messages exist, they can be combined into one message.
match_only_text
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
observer.product
The product name of the observer.
keyword
observer.type
The type of the observer the data is coming from. There is no predefined list of observer types. Some examples are forwarder, firewall, ids, ips, proxy, poller, sensor, APM server.
keyword
observer.vendor
Vendor name of the observer.
keyword
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
rule.category
A categorization value keyword used by the entity using the rule for detection of this event.
keyword
rule.description
The description of the rule generating the event.
keyword
rule.id
A rule ID that is unique within the scope of an agent, observer, or other entity using the rule for detection of this event.
keyword
rule.ruleset
Name of the ruleset, policy, group, or parent category in which the rule used to generate this event is a member.
keyword
rule.version
The version / revision of the rule being used for analysis.
keyword
source.address
Some event source addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is.
keyword
source.as.number
Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet.
long
source.as.organization.name
Organization name.
keyword
source.as.organization.name.text
Multi-field of source.as.organization.name.
match_only_text
source.bytes
Bytes sent from the source to the destination.
long
source.geo.city_name
City name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.name
User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.
keyword
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.port
Port of the source.
long
tags
List of keywords used to tag each event.
keyword
url.domain
Domain of the url, such as "www.elastic.co". In some cases a URL may refer to an IP and/or port directly, without a domain name. In this case, the IP address would go to the domain field. If the URL contains a literal IPv6 address enclosed by [ and ] (IETF RFC 2732), the [ and ] characters should also be captured in the domain field.
keyword
url.original
Unmodified original url as seen in the event source. Note that in network monitoring, the observed URL may be a full URL, whereas in access logs, the URL is often just represented as a path. This field is meant to represent the URL as it was observed, complete or not.
wildcard
url.original.text
Multi-field of url.original.
match_only_text
url.path
Path of the request, such as "/search".
wildcard
url.query
The query field describes the query string of the request, such as "q=elasticsearch". The ? is excluded from the query string. If a URL contains no ?, there is no query field. If there is a ? but no query, the query field exists with an empty string. The exists query can be used to differentiate between the two cases.
keyword

Changelog

VersionDetailsKibana version(s)

1.11.4

Bug fix View pull request
Replace Azure AD with Microsoft Entra ID.

8.12.0 or higher

1.11.3

Bug fix View pull request
Update Azure Audit Logs pipeline with support for initiated_by user fields.

8.12.0 or higher

1.11.2

Bug fix View pull request
Add missing ECS field definitions.

8.12.0 or higher

1.11.1

Enhancement View pull request
Update description for event hub parameter name recommendations.

8.12.0 or higher

1.11.0

Enhancement View pull request
Use ecs definition of the 'event.dataset' field for eventhub

8.12.0 or higher

1.10.0

Enhancement View pull request
Add Microsoft Graph Activity Logs

8.12.0 or higher

1.9.2

Enhancement View pull request
Add docs for running the integration behind a firewall.

8.12.0 or higher

1.9.1

Bug fix View pull request
Set field type to password on secret fields.

8.12.0 or higher

1.9.0

Enhancement View pull request
Add support for integration secrets

8.12.0 or higher

1.8.3

Enhancement View pull request
Add caller_ip_address field in pipeline for Azure sign-in logs.

8.8.0 or higher

1.8.2

Enhancement View pull request
Update Azure logs documentation.

8.8.0 or higher

1.8.1

Enhancement View pull request
Update AD Logs documentation.

8.8.0 or higher

1.8.0

Enhancement View pull request
Allow rerouting of Azure logs events to a different data stream.

8.8.0 or higher

1.7.0

Enhancement View pull request
Rebrand Azure Spring Cloud Logs to Azure Spring Apps

8.6.0 or higher

1.6.0

Enhancement View pull request
Update the package format_version to 3.0.0.

8.6.0 or higher

1.5.33

Bug fix View pull request
Handle json.properties.clientIp as an alias of json.properties.clientIP in application gateway logs

8.6.0 or higher

1.5.32

Bug fix View pull request
Fix mappings for azure.activitylogs.claims.*.

8.6.0 or higher

1.5.31

Enhancement View pull request
Migration of Azure AD Identity Protection dashboard to Lens.

8.6.0 or higher

1.5.30

Enhancement View pull request
Migration of Azure AD Provisioning Logs dashboard to Lens.

8.6.0 or higher

1.5.29

Enhancement View pull request
Fix Azure dashboards descriptions and titles.

8.6.0 or higher

1.5.28

Enhancement View pull request
Migration Alerts Overview dashboard to Lens

8.6.0 or higher

1.5.27

Bug fix View pull request
Fix in Firewall dashboards

8.6.0 or higher

1.5.26

Bug fix View pull request
Handle duplicate user_agent.original field in signinlogs logs

8.6.0 or higher

1.5.25

Bug fix View pull request
Handle duplicate url.path field in application gateway logs

8.6.0 or higher

1.5.24

Bug fix View pull request
Handle firewall events for DNAT'ed requests with attributes

8.6.0 or higher

1.5.23

Enhancement View pull request
Update Azure Logs screenshot

8.6.0 or higher

1.5.22

Enhancement View pull request
Migration of Azure Cloud Overview dashboard to Lens and style changes

8.6.0 or higher

1.5.21

Enhancement View pull request
Migration of User Activity Dashboard to Lens

8.6.0 or higher

1.5.20

Enhancement View pull request
Integration settings UI for sanitization

8.6.0 or higher

1.5.17

Enhancement View pull request
Migration of Spring Cloud Overview dashboard to Lens

8.6.0 or higher

1.5.16

Enhancement View pull request
Migration of Azure Spring Cloud Logs Application Cloud Logs dashboard to Lens

8.6.0 or higher

1.5.15

Enhancement View pull request
Migration of Spring Cloud System Logs dashboard to Lens

8.6.0 or higher

1.5.14

Enhancement View pull request
Enhancement/Improving performance of the dashboards

8.6.0 or higher

1.5.13

Enhancement View pull request
Extend the Storage Account container documentation and add link to requiements and setup instructions

7.16.0 or higher
8.0.0 or higher

1.5.12

Enhancement View pull request
Added categories and/or subcategories.

7.16.0 or higher
8.0.0 or higher

1.5.11

Enhancement View pull request
Add a new message format to the AzureFirewallNetworkRule log category

7.16.0 or higher
8.0.0 or higher

1.5.10

Bug fix View pull request
Check for 'event.original' already existing in Application Gateway and Event Hub ingest pipelines

7.16.0 or higher
8.0.0 or higher

1.5.9

Bug fix View pull request
Check for 'event.original' already existing in firewall logs ingest pipeline

7.16.0 or higher
8.0.0 or higher

1.5.8

Bug fix View pull request
Add storage_account_container option to the Application Gateway integration

7.16.0 or higher
8.0.0 or higher

1.5.7

Bug fix View pull request
Fix parsing of authentication_processing_details field in signin logs

7.16.0 or higher
8.0.0 or higher

1.5.6

Bug fix View pull request
Fix parsing error client port is blank and adjust for timeStamp

7.16.0 or higher
8.0.0 or higher

1.5.5

Bug fix View pull request
Rename identity as identity_name when the value is a string

7.16.0 or higher
8.0.0 or higher

1.5.4

Enhancement View pull request
Enable Event Hub integration by default and improve documentation

7.16.0 or higher
8.0.0 or higher

1.5.3

Enhancement View pull request
Data streams start as disabled on new installs

7.16.0 or higher
8.0.0 or higher

1.5.2

Bug fix View pull request
Fix PR link in changelog

7.16.0 or higher
8.0.0 or higher

1.5.1

Bug fix View pull request
Fix documentations formatting (remove extra 'Overview' heading)

7.16.0 or higher
8.0.0 or higher

1.5.0

Enhancement View pull request
Add Azure Application Gatewaty data stream

7.16.0 or higher
8.0.0 or higher

1.4.1

Enhancement View pull request
Update Azure Logs documentation

7.16.0 or higher
8.0.0 or higher

1.4.0

Enhancement View pull request
Add two new data streams to the Azure AD logs integration: Azure Identity Protection logs and Provisioning logs

7.16.0 or higher
8.0.0 or higher

1.3.0

Enhancement View pull request
Add the possibility to override the default generated storage account container

7.16.0 or higher
8.0.0 or higher

1.2.3

Enhancement View pull request
Update docs with recommended Event Hub configuration

7.16.0 or higher
8.0.0 or higher

1.2.2

Enhancement View pull request
Update package name and description to align with standard wording

7.16.0 or higher
8.0.0 or higher

1.2.1

Bug fix View pull request
Fix Azure Sign-in logs ingest pipeline bug

7.16.0 or higher
8.0.0 or higher

1.2.0

Enhancement View pull request
Support Azure firewall logs

1.1.11

Bug fix View pull request
Improve support for event.original field from upstream forwarders.

1.1.10

Enhancement View pull request
Update readme with links to Microsoft documentation

7.16.0 or higher
8.0.0 or higher

1.1.9

Bug fix View pull request
Improve handling of IPv6 IP addresses.

1.1.8

Enhancement View pull request
Update docs with details about Event Hub name recommendations

7.16.0 or higher
8.0.0 or higher

1.1.7

Bug fix View pull request
Add geo.name and result_description fields in platformlogs

7.16.0 or higher
8.0.0 or higher

1.1.6

Bug fix View pull request
Fix azure.activitylogs.identity with a a concrete value

Bug fix View pull request
Add identity_name, tenant_id, level and operation_version into activity logs

7.16.0 or higher
8.0.0 or higher

1.1.5

Enhancement View pull request
Add documentation for multi-fields

1.1.4

Bug fix View pull request
Fix event.duration field mapping conflict in all Azure data streams.

1.1.3

Enhancement View pull request
Added the forwarded tag by default to all log types.

1.1.2

Bug fix View pull request
Add device_detail.is_compliant and device_detail.is_managed fields

Bug fix View pull request
Change authentication_requirement_policies to flattened type

7.16.0 or higher
8.0.0 or higher

1.1.1

Bug fix View pull request
Fix field mapping conflict in the auditlogs data stream for client.ip. Changed azure-eventhub.offset and azure-eventhub.sequence_number to longs from keyword in the eventhub data stream.

1.1.0

Enhancement View pull request
Support new Azure audit logs and signin logs

1.0.1

Enhancement View pull request
Remove beta release tag from data streams

7.16.0 or higher
8.0.0 or higher

1.0.0

Enhancement View pull request
Move azure package to GA

7.16.0 or higher
8.0.0 or higher

0.12.3

Enhancement View pull request
Update to ECS 8.0

0.12.2

Bug fix View pull request
Regenerate test files using the new GeoIP database

0.12.1

Bug fix View pull request
Change test public IPs to the supported subset

0.12.0

Enhancement View pull request
Release azure package for v8.0.0

0.11.0

Enhancement View pull request
Add Azure Event Hub Input

0.10.1

Enhancement View pull request
Uniform with guidelines

0.10.0

Enhancement View pull request
signinlogs - Add support for ManagedIdentitySignInLogs, NonInteractiveUserSignInLogs, and ServicePrincipalSignInLogs.

0.9.2

Bug fix View pull request
Prevent pipeline script error

0.9.1

Bug fix View pull request
Fix logic that checks for the 'forwarded' tag

0.9.0

Enhancement View pull request
Update to ECS 1.12.0

0.8.6

Bug fix View pull request
Add ECS client.ip mapping

0.8.5

Enhancement View pull request
Update docs and logo

0.8.4

Enhancement View pull request
Convert to generated ECS fields

0.8.3

Enhancement View pull request
Import geo_points from ECS

0.8.2

Enhancement View pull request
Update error message

0.8.1

Enhancement View pull request
Add support for springcloud logs inside the platformlogs pipeline

0.8.0

Enhancement View pull request
Import ECS field definitions

0.7.0

Enhancement View pull request
Add spring cloud logs

0.6.2

Enhancement View pull request
update to ECS 1.11.0

0.6.1

Enhancement View pull request
Escape special characters in docs

0.6.0

Enhancement View pull request
Update integration description

0.5.1

Enhancement View pull request
Re-add pipeline changes for invalid json

0.5.0

Enhancement View pull request
Add input groups

0.4.0

Enhancement View pull request
Set "event.module" and "event.dataset"

0.3.1

Enhancement View pull request
sync package with module changes

0.3.0

Enhancement View pull request
update to ECS 1.10.0 and adding event.original options

0.2.3

Enhancement View pull request
update to ECS 1.9.0

0.2.2

Bug fix View pull request
Correct sample event file.

0.2.1

Bug fix View pull request
Add check for empty configuration options.

0.2.0

Enhancement View pull request
Add changes to use ECS 1.8 fields.

0.0.1

Enhancement View pull request
initial release

On this page